Chill-Wizard System
Introducing Brew-Magic Chill-Wizard® the first and only Wort Chilling System! Chill-Wizard is a ‘System’ not simply a chiller.
Most all brewers employ several components, in sequence in order to chill wort and prepare it for the fermenter. These components include hosing, pump, ball-valves, plate chiller or counterflow, temp. gauge, oxygen diffusion apparatus with stone, etc. etc. Virtually all wort-chillers currently sold only include the chiller itself and brewers must purchase, assemble, connect, each component prior to use. Then when done, each in turn must be disconnected, oftentimes disassembled and then cleaned separately.
Not so with Chill-Wizard!
Chill-Wizard is a complete portable chilling ‘system’ that includes all of the above mentioned components in a logical, sequential order that allows for CIP ( clean-in-place ) simplicity and semi-automation. This is truly a remarkable tool with ‘carry-handle’ ease of storage.
Boiling wort is directed to a heat resistant, magnetic drive pump. An inline ball-valve will allow the user to restrict the flow of wort through a highly efficient, stainless plate chiller that uses your garden hose connection, water source for cooling. By restricting the wort flow, the brewer gains the best efficiency for the cooling water, and is able to observe the outlet wort temperature via the Chill-Wizard’s installed dial thermometer. Cool wort joins the Chill-Wizard’s inline, two (2) micron oxygen diffusion stone that nicely infuses a foam layer of pure oxygen into the wort, prior to making its way to your clean fermenter.
Now imagine being able to clean all of the above components, all at the same time. Connect your kettle-full of hot detergent to the Chill-Wizard and simply turning the unit’s pump on. Direct the outlet flow back to the kettle and allow to circulate while you attend to other tasks. Do the same thing with rinse water, drain, and put the unit on the shelf for your next session. That’s it!
Watch the video below for a close up view of all the reasons that make Chill-Wizard the best and only ‘Chill-System’ available.
The clear majority of brewers have serious issues with their current wort chillers:
- Chillers, because of their closed design, tend to be difficult to clean.
- There is no built in method for adjusting flow rate to adjust for exchange water temperature.
- None can give the brewer feedback regarding current efficiency.
- Most owners wish to inject Oxygen into the wort flow requiring another add-on.
- Most brewers utilize a pump to push wort to a filter and fermenter. More cleaning.
- None have a gauge to determine outbound wort temperature.
- None combine all components into a neat portable unit.
- Brewers must clean each of the above components separately.
- None have ‘CLEAN-IN-PLACE’ (CIP) capability.
Brew-Magic ‘Chill-Wizard’, eliminates all of the above problems!
